POP® Standard blind rivets
For fastening and connecting one or more components. The working process is undertaken "blind" from one side. As a rsult of the riveting process, a large contact pressure develops on the joint parts and thus ensures a firm and secure connection.
POP® Soft-Spezial blind rivets
Special rivet with large gripping force but low radial expansion. During the riveting process, the stem end of the rivet body is split into four parts by the special design of the rivet head. As a result, a broad bearing surface is obtained for the closing head.
POP® LSR folding leg blind rivets
Secure, snug fit in metal/plastic connectors. Wide range of grip lengths. Suitable for soft composite materials. Designed for thin and delicate/damageable material. Can be used for large drill hole tolerances on the blind side.
POP® blind rivets with grooved sleeve
Specially suitable for blind-hole riveting operations in soft materials, eg. in timber and plastic, and for all applications where the grooved rivet stem engages positively in the drill-hole walling of the application. The extraction strength of the set blind rivet is dependent on the shape of the grooving of the blind rivet sleeve in the component material.
POP® closed end blind rivets
As a result of the cup-shaped form of the rivet stem, a closed and thus airtight and watertight locking head is obtained on the blind side. High bearing pressure effect.
TIFAS® multigrip blind rivets
This blind rivet stands out for its large gripping area (which reduces storage and the need for various versions) and the diverse range of applications it can be used for. Benefits of the multigrip blind rivet: large blind-side footprint, suitable for thin sheeting, high tensile strength, good bearing pressure and vibration resistance. The gripping area is achieved through numerous folding of the closing head on the blind side.
TIFAS® blind rivets
Highly versatile blind rivet for riveting profiles, pipes, tubes and tanks, etc. Wide selection of material combinations and head shapes. In combination with their high contact pressure on assembly parts, this highly diverse range of blind rivets will always guarantee solid, secure riveted joints.
TIFAS® earthing rivets
Allows protective conductors to be installed, quickly, simply and reliably. Supplied with or without integrated blade terminals.
TIFAS® bulb-tite blind rivets
Posesses large gripping effect. During the setting process, three-way star-shaped tongues are formed on the blind side as a wide closing head support. Airtight and watertight riveting of the construction with ready-made neoprene U-washer. Secure mechanical circular.
TIFAS® Grip blind rivet
Large blind-side footprint. Very suitable for thin sheeting. The securely fitting mandrel makes for vibration-proof applications. For high loads, the mandrel increases the tensile strength of the application depending on the thickness of the component. Dustproof and impermeable to water spray.
TIFAS® plastic blind rivets
Plastic blind rivet with relatively high tensile strength. Can be installed using standard tools. Does not damage varnished surface. Non-corrosive and watertight.
TIFAS® plastic clic rivets
Specially for components with difficult, if any, access from the rear, e.g. for fastening paneling, rating plates, instruction plates, cover plates or similar elements. No corrosion problems, No electrically conductive.
TIFAS® plastic retaining clips
Plastic rivet for connecting and blind hole applications, partially detachable. Especially useful on varnished surfaces. Non-corrosive.
TIFAS® Grooved blind rivets
Der TIFAS® Grooved Blindniet mit seiner gerillten Hülse wurde speziell entwickelt, um sich gegen die Bohrlochwand des darunter befindlichen Materials zu pressen. Er eignet sich hierdurch besonders für Sacklochverbindungen und für die Verarbeitung in Holz- und Kunststoffanwendungen.
TIBULB blind rivets
High-strength blind rivet with mechanical rivet shank locking. The large-size set head and the smaller set head height enable many high-strength vibration-resistant applications.
M-LOCK blind rivets
For high loads. Firm seating, even under dynamic stress. Given appropriate drill-hole preperation, the connections are watertight and airtight. The break of the rivet shank is always flush, even where there are differing material strengths within the gripping area.
MAGNA-BULB® blind rivets
Special blind rivet with large closing head formation, for rear fastening of thin-walled and “flexible” components, amongst other things. High gripping force. Secure mechanical circular locking of the rivet shank. The rivet shank fills the rivet sleeve and transmits high shear and tensile forces even under dynamic stress.
HUCKLOK™ blind rivets
Dual mechanical mandrel retention. Wide gripping area. High shear and tensile strength. Optimised rivet head footprint. Mandrel always breaks off flush in all gripping areas.
BOM® blind rivets
High-strength blind rivet with mechanically secured rivet shank, which was developed for transmitting very high shear and tensile strength properties. Vibration-resistant connection, airtight and watertight. During the setting process, a high gripping force is exerted on the joints parts. The working process is undertaken from one side only.